Connector & Pins

for use with PP9 size batteries such as the Varta 439 to convert equipment using the now discontinued Eveready 276P. Remove plug fitting from equipment & fit instead the 439 Adaptor. Your equipment will now accept the 439 battery to replace the now discontinued 276P.

This adaptor may also be used to mate PP9 battery to equipment designed to take this size of battery.

Neutrik Plug NC3FX XLR female type connector with 1 metre lead.

Lead & Ring Terminals with 3A fuse for Battery Fighter Chargers (Can be adapted to other chargers)

Lead Specification: 540mm, UL SPT-2, 18AWG
Connection with charger: Constar quick disconnected plug with dust cover.

Lead & Microphone plug for Battery Fighter Chargers (Can be adapted to other chargers)

Lead Specification: 540mm, UL SPT-2, 18AWG
Connection with charger: Constar quick disconnected plug with dust cover.

Lead & Cigarette plug with 3A fuse for Battery Fighter Chargers (Can be adapted to other chargers)

Lead Specification: 540mm, UL SPT-2, 18AWG
Connection with charger: Constar quick disconnected plug with dust cover.

Lead & Spades(4.8mm) with 3A fuse for Battery Fighter Chargers (Can be adapted to other chargers)

Lead Specification: 540mm, UL SPT-2, 18AWG
Connection with charger: Constar quick disconnected plug with dust cover.

Lead & spades (6.35mm) with 3A fuse for Battery Fighter Chargers (Can be adapted to other chargers).
Lead Specification: 540mm, UL SPT-2, 18AWG
Connection with charger: Constar quick disconnected plug with dust cover.

In-line LCD voltage display for use with Battery Fighter Chargers, BFL series leads & batteries.
Lead Specification: UL SPT-2, 18AWG, 105°C.
Connection type: Constar quick disconnect both ends c/w duct cover.
Range 5-40 Volts.

Mating cable for Ultralife UBI-2590

Coaxial waterproof lockable universal connectors with male and female plug up to 8Amps each with 100mm leads.

Two connectors are lockable with rubber o-ring when connected can be used under water up to 600mm.

Ideal for bike lighting. Fits with all Trail-tech HID lighting system.

Warning: Please check wire polarity with a voltmeter before connecting to device.

Banana Plug Gold Pin to Male T-Plug in Deans Style.

Female T-Plug in Deans Style to JR/Futaba/Hitec Servo Connector Cable.

Female JST Red BEC to Female T-Plug in Deans Style.

Male Tamiya (ELP-2P) Connector to Female T-Plug in Deans Style.

Female T-Plug In Deans Style to Small Tamiya (Nikko) M1319-2P Conector Cable.

Tamiya Style Female connector to Metal Case DC Plug Short Shaft 2.5mm ID (centre positive).

Female T-Plug in Deans Style to Alligator Clips Connector Cable.

Traxxas Style Male to Female T-Plug Deans Style.

Constar Quick Disconnect Plug to PL10 Mating adaptor for VWVB series batteries.

Molex Type 50-57-9402, 22 awg, BL="12.0"", R=14.0",0.250" Strip.

Reverse polarity to CE023A

Molex Type 03-06-1032,20 awg, B="6.10," R=4.60, W=7.83, .250" Strip & Tin.

Opposite polarity to CE032

JST Female Type SMR-02V-B, Red & Black 325mm.

Opposite polarity to CE050.

JST Female Type SMR-02V-B, Red & Black 325mm.

Opposite polarity to CE049. For male housing type, see CE051.

Anderson Connector 12AWG Black & Red 200mm 40A rated.

12 AWG silicon wire with 200mm length.
Max. load 40 Amp
Perfect for discharge terminal of  high power applications such as RC

Note:  Anderson connectors have no difference in male and female,they can mate each other by two of them as picture shown below.

Anderson Connector 17AWG Black & Red 200mm 12A rated.

Quick Disconnect Constar Trail Harness 2 PIN 290mm leads.

Maximum current capability is 12A. Reverse polarity from CE082R type.

Please ensure polarity is correct before using in application.

Quick Disconnect Trail Harness Constar 250mm leads.

Maximum current capability is 20A. Reverse polarity from CE082 type.

Please ensure polarity is correct before using in application.

JST Type XHP-3, AWG24, Black 200mm, Red 200mm, Blue 200mm, Strip & Tin 3mm

Futaba Red BEC Lead 150mm Male JST. PIN 1 = Black, PIN2 = Red.

This connector is the reverse polarity from CE132RP type.

Please ensure polarity is correct before using in application.

Futaba Red BEC Lead 150mm Male JST. PIN 1 = Red, PIN2 = Black.

This connector is the reverse polarity from CE132C type.

Please ensure polarity is correct before using in application.

Molex 10-01-1024 2Way Male Connector (CE08-050-0108). Connector width: 8.5mm.

Misc Contact 4000-T, Black, 24awg, 12.00" (300mm), Cut
Suits Molex 50-57-900x series connector housing (Our CE052).

Misc Contact 4000-T, Red, 24awg, 12.00", cut suits Molex 50-57-900x series connector housing (Our CE052).

Male AMP Type 151680-2P with 500mm red and black leads.

Molex Type 5198H-02 c/w 500mm Red & Black Leads. Connector width: 10mm.

Dual Spade Assembly (pair): 6.35mm positive (+) and 2.8mm negative (-) with 600mm leads.

Dual Spade Assembly (pair): 2.9mm positive (+) and 6.35mm negative (-) with 600mm leads.

Molex connector type 03-09-1022 (formerly 1545-R1/H9352/H9372). Leads 32/0.20 (HC6103) 300mm red, 700mm black.

JST Type NVR-02 Connector & Lead assembly with 500mm red and black leads.

Dual Spade Assembly (pair) 4.8mm SPADES V90HT 1/0.8 with 1000mm red and black leads.

2.9mm Female spade receptacles. Red/Black leads 1000mm AWG20. Main usage for connection to emergency lighting battery packs.

JST VHR-2N Male 2-PIN AWG20 with 500mm red and black leads.

Opposite polarity to CE-VHR-2N

AMP Type 480698 (350777-2P) Male with 500mm red and black leads.

Molex Type 51021-0200 28AWG leads B="125mm," R=125mm. Blunt cut.

Reverse polarity to connector CE-V

JST type PHR-3 with leads

Molex Type 22-01-1023 (formerly  5051-2, E-5051-2M), 24 awg, Black 95mm, Red 5mm, 6mm Strip & Tin.
Opposite polarity to CE-ING.

Traxxas type Female Connector with leads - 170mm 12AWG.
Traxxas 3080, Venom VEN1657

Traxxas type Male Connector with leads - 170mm 12AWG.
Traxxas 3070

Traxxas type Male and Female Connector Set.
Traxxas 3060, Venom VEN1658

Molex Type 51021-0200 28AWG leads B="125mm," R=125mm. Blunt cut.

Reverse polarity to connector CE-O

JST VHR-2N Male 2-PIN AWG20 with 500mm red and black leads.

Opposite polarity to CE-ELBP7 

JST type ZHR-2 c/w 125mm 26AWG leads.
Opposite polarity to CE-L

Molex Type 51021-0300 Blue (1), Black Middle and Red (3) 125mm 28AWG leads. Variant of CE-N.

Opposite of CE-Y.

Molex Type 51021-0300 Blue (1), Red Middle and Black (3) 125mm 28AWG leads. Variant of CE-N.

Opposite of CE-X.

Molex Type 51021-0300, 125mm 28AWG leads.

If you already own a 12VDC input power supply & want to be able to use the power supply on a commercial aircraft this device adapts the car plug on your supply to the adaptor required to plug into the passenger's armrest power outlet.

The adaptor is ideal for running and charging your notebook computer or powering any other 12 volt appliance permitted on-board. Overall length 350mm, cable length 220mm.

Anderson Type Powerpole Connector set (Red and Black) used in many 4WD applications, boating, automotive, caravans.

Supplied individually with a pair of contacts.
Contact Rating: 30A
Contact Wire Size: 2.1mm-5.3mm (#10-#14 AWG)
Voltage Rating: 600V (AC or DC)
Max Wire Insulation Diameter: 4.4mm
Contact Retention Force: 9kg

Anderson Type Powerpole Connector set (Red and Black) used in many 4WD applications, boating, automotive, caravans.

Supplied individually with a pair of contacts.
Contact Rating: 75A
Contact Wire Size: 6-16AWG
Voltage Rating: 600V (AC or DC)
Max Wire Insulation Diameter: 11.1mm

Twin pole Anderson Connector used in many 4WD applications, boating, automotive, caravans.

Supplied individually with a pair of contacts.
Contact Rating: 50A
Contact Wire Size: 6AWG
Voltage Rating: 600V (AC or DC)
Max Wire Insulation Diameter: 11mm
Contact Retention Force: 45.5kg

Twin pole Anderson Connector with 150mm Lead Set and 100A Fuse. Available as set of two (2).

Contact Rating: 50A
Contact Wire Size: 6AWG
Voltage Rating: 600V (AC or DC)
Max Wire Insulation Diameter: 11mm
Contact Retention Force: 45.5kg

Twin pole Anderson Connector used in many 4WD applications, boating, automotive, caravans.

Supplied individually with a pair of contacts.
Contact Rating: 120A
Contact Wire Size: 4.19mm (#4 AWG)
Voltage Rating: 600V (AC or DC)
Max Wire Insulation Diameter: 14.6mm
Contact Retention Force: 45.5kg

Inline Low Voltage Switch - 2.1mm DC Plug and Socket.

Simply connect your plug pack adaptor into this handy in-line switch to provided quick and easy on/off control. Much easier than unplugging the connector or reaching for the power point when you want to switch your device on or off. Fitted with 2.1mm DC plug & socket and rated at 24VDC at 2 amps.