| Comments |
100-240VAC (World Voltage) / 12VDC / 5VDC input independent channel 2 cell lithium ion battery charger.
- Comes with SAA, MEPS approved 100-240VAC (world voltage) to 5VDC input power adaptor, 12VDC to 5VDC input cigarette light connection car plug and 5VDC input USB cable.
- Single cell charger for charging one or two 3.6V/3.7V lithium ion cells in sizes 16340, 15270, 18350 and 3V rechargeable CR123A & CR2 batteries commonly used in LED torches & other devices.
- For a range of suitable cells we have available please click this link.
- Independent circuits are used for the longer cells with 2 x screw in adaptors supplied for charging shorter cells. Extra Screw in adaptors also available. See model MP/WP
Spacer Connector.
- Manual switch for charging either 3.6V/3.7V lithium ion cells or 3V rechargeable CR123A/CR2 batteries. N.B. Switch must be in the correct position for the cell type to be charged. Failure to do so could lead to damage of the equipment & possible cell explosion. Charger is not applicable to 3.2V LiFe cells.
- Charge re-activation if cell voltage drops below 4.0V if cells left in the charger to keep ready for use (3.6V/3.7V cells only).
- Algorithm based CC/CV charging system with reverse polarity & overcharge protection.
- CC charging rate 250mA
- CV cut-off current <65mA
- 2 year repair warranty (when used according to specification & in normal conditions)
|
